In this paper, application of ultrasonic techniques for defect detection in weldments of austenitic stainless steel and maraging steel is discussed. Applications of ultrasonic techniques for characterizing microstructural changes in AISI type 316 stainless steel and modified 9Cr-1Mo ferritic steel; thermomechanical processing of 15Cr-15Ni-2.3Mo-titanium modified austenitic stainless steel (allo...

in this study, the effects cold rolling and annealing parameters during thermomechanical processing of the aisi 201ln stainless steel were investigated. the cast samples were homogenized, hot-rolled and solution-annealed to acquire a suitable microstructure for the subsequent thermomechanical treatment. unidirectional and transverse multi-pass cold rolling at 25, 0 and -15 °c was carried out to...

Abstract—The numerical simulation based on the Finite Element Method (FEM) is widely used in academic institutes and in the industry. It is a useful tool to predict many phenomena present in the classical manufacturing forming processes such as fracture. But, the results of such numerical model depend strongly on the parameters of the constitutive behavior model. The influences of thermal and m...

In this study, stress relaxation phenomenon has been examined generally. Experiments were carried out on carbon steel wires with diameter 8 mm which are particularly used in prestressed concrete composites. Thermomechanically heat treatment was also carried out on this wire in order to relieve the residual stresses accumulated after the cold work. The heat treatment temperature and the stretch ...

the mechanical properties and microstructural developments of 321 stainless steel during thermomechanicalprocess were investigated. the repetitive cold rolling and subsequent annealing wereconducted to achieve nanocrystalline structure in an aisi 321 stainless steel. heavily cold rolling at−20°c was conducted to form martensite in metastable austenitic steel. the process was followed byannealin...

The work reports an experimental observation on crystal rotation in a duplex (austenite + ferrite) steel induced by the electropulsing treatment at ambient temperature, while the temperature rising due to ohmic heating in the treatment was negligible. The results demonstrate that electric current pulses are able to dissolve the initial material's texture that has been formed in prior thermomech...

in this study, the effects of nitrogen addition on the production of ultrafine/nano grained aisi 201l stainlesssteel by advanced thermo-mechanical process were investigated. cast samples were first homogenized at 1200 °c for 4 h, hot-rolled at 1100 °c and finally, solution-annealed at 1150 °c for 2.5 h. unidirectional and cross multipass cold rolling at 25 °c was carried out to 90% reduction in...

the formation of nano/ultrafine grained ferrite in low carbon steels containing different amounts of niobiumwas investigated using thermomechanical treatment which consisted of annealing of 85% cold rolled martensite with different parameters. the specimens were characterized by optical and scanning electron microscopy and vickers hardness test. a lamellar dislocation cell structure was formed ...

  Abstract   Recovery and recrystallization phenomena and effects of microalloying elements on these phenomena are of great importance in designing thermomechanical processes of microalloyed steels. Thus, understanding and modeling of microstructure evolution during hot deformation leads to optimize the processing conditions and to improve the product properties.   In this study, finite element...